1995 Hyster 100XL Forklift(sold)

Adam Murray — Tue, 30 Jun 2015 17:04:54 +0000

1992 HYSTER 100XL WITH ONLY 5200 ORIGINAL HOURS! HAS A 6CYL GAS ENGINE, 99″ LOW TRIPLE STAGE MAST, 10k LB Capacity, 60″ FORKS, SIDE SHIFT, DUAL PROPANE TANKS, AND PNUMATIC TIRES. HAS BEEEN SERVICED RIGRIOUSLY BY OWNER

Location: Long Beach, CA
Price: $10500
Hours: 5200

Dimensions
A. LENGTH TO FORK FACE 10.7 ft in 3256 mm
B. OVERALL WIDTH 4.8 ft in 1450 mm
C. OVERALL HEIGHT – MAST LOWERED 7.3 ft in 2214 mm
D. WHEELBASE 6.9 ft in 2100 mm
E. GROUND CLEARANCE 9.3 in 237 mm
F. HEIGHT TO TOP OF OVERHEAD GUARD 7.5 ft in 2300 mm
G. MAX FORK HEIGHT 9.2 ft in 2800 mm
MAST
H. MAST TIP FORWARD 6 degrees
I. MAST TIP REAR 10 degrees
SPECIFICATION

Engine
MAKE G.M.
MODEL GM 4.3L
POWER 103 hp 76.8 kw
TORQUE 225 lb ft 305.1 Nm
POWER MEASURED @ 2400 rpm
DISPLACEMENT 262 cu in 4.3 L
TORQUE MEASURED @ 2400 rpm
NUMBER OF CYLINDERS 6
FUEL TYPE LP
Operational
OPERATING WEIGHT 15297.9 lb 6939 kg
TIRE TYPE Pneumatic
NUMBER OF FRONT WHEELS 2
NUMBER OF REAR WHEELS 2
MAX SPEED 14.4 mph 23.2 km/h
MAST
LOAD CAPACITY 10020 lb 4545 kg
LOAD CENTER 24 in 610 mm
MAST TIP FORWARD 6 degrees
MAST TIP REAR 10 degrees
MAX FORK SPREAD 49.7 in 1262 mm
LIFT SPEED 112.2 ft/min 34.2 m/min
LOWER SPEED 82.7 ft/min 25.2 m/min
Dimensions
LENGTH TO FORK FACE 10.7 ft in 3256 mm
OVERALL WIDTH 4.8 ft in 1450 mm
OVERALL HEIGHT – MAST LOWERED 7.3 ft in 2214 mm
MAX FORK HEIGHT 9.2 ft in 2800 mm
WHEELBASE 6.9 ft in 2100 mm
TURNING RADIUS 9.3 ft in 2837 mm
HEIGHT TO TOP OF OVERHEAD GUARD 7.5 ft in 2300 mm
GROUND CLEARANCE 9.3 in 237 mm

The post 1995 Hyster 100XL Forklift(sold) appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

1998 JCB 532 FORK LIFT(sold)

admin — Fri, 19 Jun 2015 00:08:29 +0000

1998 JCB 532 FORK LIFT

2500 HOURS, 4X4, BOOM RECENTLY REBUILT W/ NEW HARD LINES AND HYDRAULICS, NEW SEATS TO POSITION BOOM, TRANSMISSION HAS LESS THAN 200 HRS
General information

1998 JCB 532 FORK LIFT Specs

Fuel type

Diesel

Mast type (standard)

Telescopic boom

Capacity A

7000 lb (3,175.15 kg)

@ Lift height A

472 inch (11,988.80 mm)

Capacity B

3000 lb (1,360.78 kg)

@ Forward reach B

315 inch (8,001.00 mm)

Cabin position

Centre side

Operator position

Sit down

Notes

Low mounted boom for 360 degree visibility
Q-fit tool carrier
Performance specifications

Travel speed forward, no load

15.5 mph (24.94 kph)
Power specifications

Rated power

102 HP

@ rpm

2200

Transmission, type

Powershift

Transmission, make

JCB

Gears forward

Gears reverse

4
Dimensions and weight

Max. lift height

472 inch (11,988.80 mm)

Max. forward reach

315 inch (8,001.00 mm)

Lowered height

102 inch (2,590.80 mm)

Machine length

230 inch (5,842.00 mm)

Machine width

93 inch (2,362.20 mm)

Machine wheel base

108 inch (2,743.20 mm)

Outside turning radius

158 inch (4,013.20 mm)

Machine weight (no load)

22400 lb (10,160.47 kg)

Gross weight (with load)

29400 lb (13,335.62 kg)
Wheels, tyres and brakes

Wheel number

Wheels driven

Tyres, type

Pneumatic

Tyre size, front

15.5-25

Tyre size, rear

15.5-25

Brakes, type (service)

Hydraulic

The post 1998 JCB 532 FORK LIFT(sold) appeared first on Pacific Coast Iron - Used Heavy Equipment Dealer.

Forklifts Archives - Pacific Coast Iron - Used Heavy Equipment Dealer

1995 Hyster 100XL Forklift(sold)

1998 JCB 532 FORK LIFT(sold)

1998 JCB 532 FORK LIFT Specs